계측기 (Tester)/중고계측기(렌탈)

[중고계측기] 절연저항측정기 키쿠수이 TOS9213AS (태양광 전지) 내전압시험기 소개 드립니다

MyGodisGreater 2023. 2. 17. 12:31

절연저항측정기 키쿠수이 TOS9213AS (10 kV DC) 태양광 전지 Kikusui 내전압시험기 소개시작합니다~

The maximum system voltage is the key for insulation test of PV (Photovoltaic) modules.

It can also be used to check for PID.


개요 : TOS9200 DC Withstanding Voltage Insulation Resistance Tester

TOS9200은 AC 내전압, 전열저항측정기/시험기 2가지 기능을 탑재한 내전압 절연저항 시험기입니다. 심장부인 전원에 고효율 스위칭 직류 전원과 PWM 방식의 교류 전원을 채택함. 이것에 의해 높은 출력, 높은 안정, 또한 경량. 콤팩트화를 실현하고 있습니다. 그리고 접지 도통 시험기 (TOS6200)와 조합하면 3가지 시험을 단일 공정으로 실행할 수 있습니다. 고전압 스캐너 TOS9220/TOS9221을 조합하면 최대 16채널의 테스트 포인트를 자동으로 검사할 수 있어 보다 안전하고 신뢰성 높은 자동 검사 시스템으로 활용할 수 있습니다.


절연저항측정기/시허기 키쿠수이 Kikusui TOS9213AS Hipot/Insulation Resisance Tester 앞/옆면입니다.

Basic Performance

Three Functions - AC Hipot testing, DC Hipot Testing and Insulation Resistance Testing

AC Hipot Testing at 5 kV and 100 mA

Equipped with a high-efficiency switching power spply in its high-vltage power block, a PWM-based switching ampliier and a 500 VA high-voltage transformer, the TOS9200/TOS9201 realizes a maximum output of 5 kV/100mA (continuous output for 30 minutes), or 2.5 times the output of Kikusui's former models.

 
 

절연저항측정기 키쿠수이 TOS9213AS 중고계측기 렌탈 대여 수리 장비 입니다

특징 - 절연저항측정기/내전압시험기

  • 10 kV / 5mA 최대 출력 50 W의 DC 내전압 시험
  • -25 V ~1500V / 0.01 M Ω ~9.99 G Ω의 절연 저항 시험
  • IEC61730-2, IEC61215, IEC61646 등에 대응
  • 고정밀 전류 전류측정, 1㎂ 판정 분해능
  • 용량 성 부하를 고려한 100 Vp-p (at 10 kV)의 낮은 리플 출력
  • PV 모듈에 스트레스를 주지 않은 부드러운 전압 시험
  • 전압 복귀 형상에 대응, 최대 300 초 강제 방전 타이머 기능
 
 

키쿠수이 절연저항측정기 내전압시험기 TOS9213AS (태양광전지용) 내전압 시험기 - 옆/뒷면입니다.

절연저항 시험 및 습윤 누설 전류 시험

각 규격 모두 500V/sec 이하의 속도로 500V 또는 모듈의 최대 시스템 전압 중 큰 전압까지 상승시켜 전압을 유지합니다. 태양광 발전을 사업으로 시공할 경우 최대 시스템 전압을 올리는 경향이 TOS9213AS에서는 절연저항 시험에 적용하는 DC 전압을 1500V까지 올릴 수 있습니다.

 
 

절연저항측정기 키쿠수이 TOS9213AS DC Withstanding Insulation Resistance Tester 내전압시험기

DC WITHSTANDING VOLTAGE/INSULATION RESISTANCE TESTER

IEC61730-2 STANDARD TEST - The applied voltage varies depending on the applicable calss in IEC61730-2 For Class A, the voltage is raised at a speed of 500V/s or less to (2000V + 4 times of the maximum system voltage) and then maintained for 1 min.

INSULATION RESISTANCE TEST & WET LEAKAGE TEST - As the maximum system voltage in solar power generation projects continues to trend higher, the TOS9213AS can raise the DC voltage that is applied at the insulation resistance test up to 1500V.

REPRODUCTION OF PID - When performing tests for PID (Potential Induced Degradation), which is a problem with current PV modules, a negative polarity DC power source is required. By turning OFF the timer setting in the TOS9213AS insulation resistance test mode, it is possible to perform these tests with the TOS9213AS in the same way. Max. current capacity: 1 mA up t 1020 V, 0.1 mA at or above 1020 V)

첨부파일
kikusui-tos9213as_datasheet.pdf
파일 다운로드
  •  
절연저항측정기 키쿠수이 Kikusui TOS9213AS 내전압시험기 대여 렌탈 판매 Withstanding Voltage Tester/ Insulation Voltage Tester

오늘은 키쿠수이 절연저항측정기/내전압시험기 TOS6213AS 에대해 간단 소개했습니다.

이외에도 다양한 중고 계측기 판매 대여 렌탈 하고 있는 피엔텍입니다.

필요하시건 궁금하시면 아래로 연락하시기 바랍니다~