안녕하세요. 계측기 전문업체 피엔텍입니다. 오실로스코프문의가 많아 소개해드리려고합니다. 오늘 입고된 장비는 텍트ㅜ로닉스 오실로스코프이며, 2채널로 상태는 최상이며, 중고계측기입니다. 업무 또는 연구에 필요한 장비라면 연락주세요. 친절하게 안내해드리겠습니다.
목차
1. 텍트로닉스 TDS3012 주요특징
2. 오실로스코프 TDS3012 제품설명
3. 텍트로닉스 TDS3012 사양 및 실사진
4. 마무리
동영상 미리보기
텍트로닉스 TDS3012 주요특징
- 500 MHz, 300 MHz, and 100 MHz Bandwidths
- Sample Rates up to 5 GS/s
- 2 or 4 Channels
- Full VGA Color LCD on all Models
- Built-in Floppy Disk Drive For Easy Storage and Documentation
- 21 Automatic Measurements
- Centronics Port Standard on all Models for Quick, Convenient Hardcopies
- 9-bit Vertical Resolution
- Multi-Language User Interface
- QuickMenu User Interface Mode for Quick, Easy Operation
- Optional Modules for RS-232, GPIB, LAN or VGA Communication Ports
- Advanced Triggers, such as, Glitch, Width, and Logic Standard on 4 Channel Models
- Telecommunications Mask Testing (TMT)
- Fast Fourier Transform (FFT) for Frequency and Harmonic Analysis Standard on 4 Channel Models
- Extended Video Application Module
- Support for Active Probes, Differential Probes, and Current Probes that Provide Automatic Scaling and Units
오실로스코프 TDS3012 제품설명
The TDS3000 Series of Digital Phosphor Oscilloscopes
The TDS3000 oscilloscopes are the lowest priced, most portable Digital Phosphor Oscilloscopes (DPOs). Now every design engineer and technician can take advantage of the tremendous benefits of DPOs. DPOs deliver a new level of insight that makes dealing with complex signals simple. DPOs display, store, and analyze, in real-time three dimensions of signal information: amplitude, time, and distribution of amplitude over time.
Benefits of DPO
DPOs have an intensity graded color display that provides information about the frequency of occurrence of signal amplitudes and widths. This helps the user locate and characterize waveform anomalies that can be elusive on traditional Digital Storage Oscilloscopes. The fast update rate of DPOs also makes it easier to capture and display infrequent waveforms or waveform variations.
Quick to Learn and Quick to Use
The TDS3000 Series graphical user interface offers a new operating mode called QuickMenu. This quick access user interface makes the main oscilloscope controls accessible with a push of a single button. Included with every scope is an On-Line Tour disk that runs in the oscilloscope. This disk gives an overview of the product's operation and capabilities.
Flexible Features for Every Application
The portable form factor allows the instrument to go wherever it is needed. The Communication and Application Modules enable the instrument to be configured for specific applications or upgraded without returning it to the manufacturer. The TekProbe® Level II interface provides power to a range of application specific accessories.
Application Modules
With the application module concept, the TDS3000 Series can be easily adapted to the needs of the user. These modules are easily installed by the user. At power on the scope indicates which modules are installed. Currently, there are five application modules available for the TDS3000 Series - a telecommunications mask test module, an FFT module, an advanced trigger module, a 601 digital video module and an extended video module. In addition, there are three communication modules available - a 10Base-T LAN/RS-232 module, a GPIB/RS-232 module and a VGA/RS-232 module. Centronics port is standard.
TDS3TMT - Telecommunications Mask Testing Module
When this module is installed in the TDS3000 Series scope, the TDS3000 DPO becomes a Pass/Fail test instrument for telecommunications standard compliance testing.
ITU-T G.703 (DS0, DS1, E1, Clk Interface, DS2, E2, E3, and DS3 rates) standards supported
ANSI T1.102 (DS1, DS1A, DS1C, DS2, DS3, and STS-1 rates) standards supported
Custom mask editing also available using WaveStar™ software for oscilloscopes V2.3
Properly terminate your device under test with Communication Signal Adapters
Use TDS3GM (GPIB) or the NEW TDS3EM (LAN) communication modules to program the TDS3000 for automated testingTypical Application of TMT Module
When testing network line cards in manufacturing, one of the most important considerations is throughput! The combination of DPO waveform throughput and hardware assisted mask testing results in breakthrough test speeds for mask testing on single and multiple channel devices.
텍트로닉스 TDS3012 사양 및 실사진
TDS3000 Series Electrical Characteristics
| TDS3012 | TDS3032 | TDS3052 | TDS3014 | TDS3034 | TDS3054 | |
| Bandwidth | 100 MHz | 300 MHz | 500 MHz | 100 MHz | 300 MHz | 500 MHz |
| Channels | 2 | 2 | 2 | 4 | 4 | 4 |
| Sample Rate on Each Channel | 1.25 GS/s | 2.5 GS/s | 5 GS/s | 1.25 GS/s | 2.5 GS/s | 5 GS/s |
| Maximum Record Length | 10K points on all models | |||||
| Vertical Resolution | 9–bits on all models | |||||
| Vertical Sensitivity (/div) | 1 mV-10 V on all models | |||||
| Vertical Accuracy | ±2% on all models*1 | |||||
| Max Input Voltage (1 megohm) | 150V RMS CAT I on all models | |||||
| Position Range | ±5 div on all models | |||||
| BW Limit | 20 MHz | 20, 150 MHz | 20, 150 MHz | 20 MHz | 20, 150 MHz | 20, 150 MHz |
| Input Coupling | AC, DC, GND on all models | |||||
| Input Impedance Selections | 1 megaohm in parallel with 13 pF, or 50 ohm | |||||
| Time Base: | ||||||
| Range (/div) | 4 ns - 10 s/div | 2 ns - 10 s/div | 1 ns - 10 s/div | 4 ns - 10 s/div | 2 ns - 10 s/div | 1 ns - 10 s/div |
| Accuracy | 200 ppm | 200 ppm | 200 ppm | 200 ppm | 200 ppm | 200 ppm |
| Display Monitor | Color LCD | |||||
마무리
이외에도 저희 피엔텍에서는 다양한 사양의 계측장비를 보유하고있습니다.
제품구매 / 렌탈 / 대여 / 수리 등 기타 궁금한점이나 문의사항 있으시면 언제든지 연락주세요. 계측기 전문 상담사가 친절하게 안내해드리겠습니다.
문의 : 010-2331-0295 / ☎ 02-407-5295
이메일 : dhjang02@gmail.com
계측기렌탈 / 계측기수리 / 계측기판매 / 중고계측기 / 오실로스코프 수리 / 오실로스코프 대여 / 계측기수리판매
