안녕하세요 오늘 소개해드릴 제품은 AC 내전압, 절연저항 시험기 KIKUSUI TOS5302 INSULATION RESISTANCE TESTER 입니다. 전기 제품의 안전 확보에 필요하다고 하는 4가지의 시험 중에서 내전압시험 절연저항 시험을 하기위한 시험기입니다. 자세히 소개해드릴께요.
목차
1. 키쿠수이 TOS5302 제품사양
2. 키쿠수이 TOS5302 제품소개
3. 키쿠수이 TOS5302 제품이미지 (실사진)
4. 마무리
절연저항 시험기 키쿠수이 KIKUSUI TOS5302
키쿠수이 TOS5302 제품사양
- The PWM amp system provides highly-stable output
- Max. output-voltage of AC hipot testing : 5kV/100mA(500VA)
- Measurement range of insulation resistance testing : 25V to 1000V(7 steps), 500V or greater, up to 5.00GΩ Insulation Resistance test
- High-precision measurement ±1.5% of reading (with voltmeter 500 V or higher, Ammeter 1 mA or higher)
- Rise/Fall time control function
- The Keylock function & the Protection cover for the front panel operation
- Equipped with USB / RS232C interface
키쿠수이 TOS5302 제품소개
Simple! Secure! Safety! A new standard for Hipot & Insulation resistance testing Applied to World-Wide input voltage
The “TOS5300 Series” is a series of test instruments used in Hipot tests and insulation resistance tests, two of the four tests regarded as necessary for ensuring the safety of electrical products. With an output of 5 kV/100 mA (AC) and 6 kV/10 mA (DC), the series can be used in Hipot & insulation resistance testing of electronic equipment and electronic parts, based on the requirements of IEC, EN, UL, VDE, JIS, and other international safety standards and the Electrical Appliance and Material Safety Law.
Also, the test voltage stability is improved with the adoption of a newly developed switching amplifier. Since the output voltage can be kept constant even when the AC line voltage or frequency changes, consistent testing can be performed, even when the power supply environment is in an unstable region. The TOS5300 is also equipped with a number of features that are capable of meeting a variety of test needs. It is a new low-cost standard model that provides thorough operability, reliability and safety.
The achievement of AC Hipot testing with a constant stable output!
⟨ Input voltage variation: ± 0.3% ⟩
The output waveform is essential factor in Hipot(Withstanding voltage) testing!
A conventional Hipot (Withstanding voltage) tester boosts and outputs the AC line’s input voltage through the use of a slide transformer. With this slide transformer system, input voltage fluctuations will affect the output, preventing tests from being performed properly. At times, the application of distortion voltage applied to the EUT may cause a failure of new product(accelerating a deterioration of components).
Since the TOS5300 Series equips with a high-efficient PWM amplifier that can output a stable high-voltage without being affected by the variation of AC power line, users can perform “safe”, “stable”, and highly “reliable” tests with confidence, even in regions with large voltage variations.
Realizing high-precision measurement with high-resolution and high-speed judgement
Equipped with a high-accuracy, high-resolution of True RMS measurement circuit, including a Voltmeter with ± 1.5 % of reading (500V or greater) / minimum resolution of 1V, and an Ammeter with ±1.5 % of reading (1mA or more) / minimum resolution of 1 μA. In addition, it is also equipped with an Auto range function.
The Lower limit judgment accuracy achieves a level of performance equivalent to the Upper limit judgment accuracy that enables to detect for such a poor contact or disconnections of test leads. Moreover, it realizes the fast judgment by the test time of 0.1 second, while reliable testing can be performed, thanks to high-precision, high-resolution, high-speed measurement and the judgment functions.
Protection cover prevents physical operation error in the production site
Prevents a physical operation error by installing the protection cover on the control keys.
In many cases, workers on electronic equipment production lines and inspection lines are not technical experts. Therefore, it is possible that the operators may change setting conditions and make operation errors. In order to prevent from such cases, the TOS5300 is equipped with a key lock function and a protection cover to disable a physical key operation from the front panel.Storing the protection cover for the key operation to the base of unit.
During the periods of operation with the protection cover removed, such as when the test conditions are frequently changed and tests are performed repeatedly, the protection cover can be stored at the base.
관련자료
키쿠수이 TOS5302 제품이미지 (실사진)
마무리
이외에도 저희 피엔텍에서는 다양한 사양의 계측장비를 보유하고있습니다.
제품구매 / 렌탈 / 대여 / 수리 등 기타 궁금한점이나 문의사항 있으시면 언제든지 연락주세요. 계측기 전문 상담사가 친절하게 안내해드리겠습니다.
문의 : 010-2331-0295 / ☎ 02-407-5295
이메일 : dhjang02@gmail.com
계측기렌탈 / 계측기수리 / 계측기판매 / 중고계측기 / 오실로스코프 수리 / 오실로스코프 대여 / 계측기수리판매
중고계측기 : 히오키 디스플레이 유닛 HIOKI CM7290 계측기렌탈 판매 대여
안녕하세요. 오늘 소개해드릴 장비는 히오키사의 디스플레이 유닛 HIOKI CM7290 입니다. 다양한 계측장비를 보유하고있습니다. 연구 또는 업무에 필요한 장비라면 연락주세요. 친절하게 안내해드
pntech.tistory.com
계측기수리 : 텍시오 Texio STW-9904 AC/DC WITHSTANDING VOLTAGE/INSULATION RESISTANCE/GROUND BOND TESTER/ 전기안전 시
오늘 알아볼 장비는 전기 안전 시험기로 Texio STW-9904입니다. 이장비 함께 알아보기록하며, 필요한 장비라면 연락 주시기 바랍니다. 저희 계측기전문 상담가가 친절하게 아내해드립니다. 목차 1.
pntech.tistory.com