오늘의 리뷰는 중고메모리하이코더/레코더 히오키 / Hioki MR8880 Memory HiCorder 입니다. 메모리 하이코더란 채널 사이 그리고 각 채널에서 접지에 까지 완벽한 격리로 인한 전압, 전류, 온도, 진동,중량, 가속도와 로테이션 등과 같은 여러 가지 물리적 현상을 동시에 측정 할 수 있는 고속의 파형 모니터링 및 기록계입니다. 히오키 MR8880 스펙 및 젤품설명 드리며, 이 장비 업무 또는 연구에 필요한 장비라면 언제든지 연락주세요. 친절하게 안내해드리겠습니다.
목차
1. Overview
2. Key Features
3. Specifications
4. 실사진
5. 마무리
MEMORY HiCORDER MR8880
Capture High- to Low-Voltage Signals in a Single Device! Rugged, Professional and Ready for the Field
Overview
Hioki Memory HiCorders are high-speed waveform monitoring and recording devices that can simultaneously measure multiple quick-changing phenomena due to complete isolation between channels and from each channel to the ground. The MR8880 is a data acquisition (DAQ) recorder built in with 4 analog channels that can accept direct input of 600V, enabling measurements of 3-phase systems.
Measuring Current Waveforms: How to Use Hioki Memory HiCorders
Learn how to use the Hioki MR8880’s trigger function to definitively record the startup current when a motor is powered on.
Pre-trigger settings let you capture details about the situation before and after the trigger is activated, and numerical data of the peak current waveform can be easily identified using the built-in cursor functions.
Key Features
- CAT III 600V isolation performance; directly measure a 480V power line
- 4 completely isolated channels let you simultaneously record data on a 3-
- phase power line plus have one extra channel
- Tough against harsh environments; -10°C to 50°C operating temperature range
- Built to withstand mechanical shocks and vibrations (ships standard with side protectors)
- Make settings easily with PRESETS function
Recording PLC Timing: How to Use Hioki Memory HiCorders
Watch this video to learn how to use logic probes to analyze the timing of control signals via the 8 logic and 4 analog channels built-in to the Hioki MR8880. Based on the AND / OR settings, the MR8880’s trigger will activate with respect to the specified logic level. Pre-trigger settings let you capture details about the situation before and after the trigger is activated.
Recording Voltage Drop During a Power Outage: How to Use Hioki Memory HiCorders
Watch this video to learn how to easily detect when a voltage drop on the commercial power supply will occur by using the trigger function on a Hioki Memory HiCorder and setting the peak waveform level as the voltage level. The waveforms can also be automatically printed onsite and saved to portable external media for later analysis on a PC.
Specifications
| Number of channels | 4 analog channels + 8 logic channels (standard) Note: Isolated analog channels, isolated input and frame, logic has common GND |
| Measurement ranges(10 div full-scale) | 4 channels of voltage measurement; mode switchable between instantaneous waveform or RMS value, 10 mV to 100 V/div, 13 ranges, resolution: 1/640 of range RMS value mode: 30 Hz to 10 kHz, Crest factor: 2 |
| Max. rated voltage | Between terminals: 600 V AC/DC, Between terminal to earth: 600 V AC/DC CAT III; 300 V AC/DC CAT IV |
| Frequency characteristics | DC to 100 kHz (±3dB) |
| Time axis(High-speed function) | 100 µs to 100 ms/div, 10 ranges, Sampling period: 1/100 of range |
| Recording intervals(Real-time function) | 100 µs to 1 minute, 19 selections (simultaneous sampling in all channels) |
| Measurement functions | High-speed function (high speed recording) Real-time function (actual time recording) |
| Memory capacity | 14-bits × 1M-words/ch (1 word = 2 bytes) |
| Removable storage | CF card slot ×1 (Up to 2 GB), USB 2.0 memory ×1 |
| Printing | [Printer unit is option] 112 mm (4.41 in) × 18 m (59.06 ft), thermal paper roll, Recording speed : 10 mm (0.39 in)/sec Note: Printing is not supported when using alkaline batteries |
| Display | 5.7-inch VGA-TFT color LCD (640 × 480 dots) |
| Displayable languages | English, Japanese, Chinese |
| Communication interfaces | USB 2.0 mini-B receptacle × 1; Transfers files from the installed CF card or USB memory stick to a PC when connected, and External PC control |
| Power supply ssories | AC adapter Z1002: 100 to 240 V AC (50/60 Hz), 45 VA (include AC adapter, when Real-time recording), 107 VA (include AC adapter, when Real-time recording and printing) Battery pack Z1000: AC adapter has priority when used in combination with battery pack, recharge with AC adapter 3 hours, Continuous use 3 hours (with back-light ON) LR6 (AA) alkaline batteries ×8, Continuous use 40 minutes, (with back-light ON, cannot be used with the Printer unit) DC power supply: 10 to 28 V DC (cable available by special order) |
| Dimensions and massIncluded acce | 205 mm (8.07 in)W × 199 mm (7.83 in)H × 67 mm (2.64 in)D, 1.66 kg (58.6 oz) (with the Battery pack installed) When printer is combined - with main unit: 303 mm (11.93 in)W × 199 mm (7.83 in)H × 67 mm (2.64 in)D, 2.16 kg (76.2 oz) (with the Battery pack installed) |
| Included accessories | Instruction manual ×1, AC adapter Z1002 ×1, Alkaline battery box ×1, Strap ×1, USB cable ×1, Application disk (Wave viewer Wv, Communication commands table) ×1 |
실사진
마무리
이외에도 저희 피엔텍에서는 다양한 사양의 계측장비를 보유하고있습니다.
제품구매 / 렌탈 / 대여 / 수리 등 기타 궁금한점이나 문의사항 있으시면 언제든지 연락주세요. 계측기 전문 상담사가 친절하게 안내해드리겠습니다.
문의 : 010-2331-0295 / ☎ 02-407-5295
이메일 : dhjang02@gmail.com
계측기렌탈 / 계측기수리 / 계측기판매 / 중고계측기 / 오실로스코프 수리 / 오실로스코프 대여 / 계측기수리판매
