플루크 / Fluke DSX5000 네트워크 분석기 최대주파수 1000MHz / 중고계측기

오늘 날씨가 참 좋습니다. 좋은계절 같아요. 이번주 벗꽃도 절정일듯 합니다. 열심히 일하고 산책 가봐야겠스빈다. 오늘 소개해드릴 장비는 중고계측기 DSX5000 네트워크 분석기입니다. 이장비 입고되어서 스펙 알아보고 안내해 드리겠습니다. Fluke networks 플루크 네트워크분석기 알아볼께요.

 

목차

1. 소개

2. 스펙

3. 실사진

4. 마무리

 

 

---

 

 

플루크 / Fluke DSX5000 네트워크 분석기 

 

 

 

 

 

 

 

---

 

 

DSX5000 소개

 

 

Fluke Networks DSX-5000 Cable Analyzer

 

 

DSX-5000 Cable Analyzer는 가장 엄격한 정확도 요구사항인 IEC 레벨 V 초안을 충족시키면서 Cat 6A 및 클래스 FA 테스트에 타의 추종을 불허하는 속도로 구리 인증의 효율성을 향상시킵니다. ProjX Management System은 작업이 처음부터 올바르게 수행되도록 지원하고 설정에서 시스템 수락까지의 진행 상황을 추적하도록 도와줍니다. Versiv 플랫폼은 광섬유 테스트(OLTS 및 OTDR 모두)와 Wi-Fi Analysis 및 이더넷 문제 해결을 위한 모듈을 지원합니다. 이 플랫폼은 미래 표준을 지원하기 위해 쉽게 업그레이드할 수 있습니다. 누화, 반송 손실 및 실드 결함을 포함한 장애의 원인을 그래픽으로 표시하는 Taptive 사용자 인터페이스를 사용하여 장애를 더 빠르게 문제 해결합니다. LinkWare™ Management Software를 사용하여 테스트 결과를 분석하고 전문 테스트 보고서를 작성합니다.

Fluke Networks의 DSX-5000 Cable Analyzer는 Intertek (ETL) 정확도 레벨 IV에 대한 IEC-61935-1 사양 및 정확도 레벨 V 초안에 따라 검증되며, 레벨 IIIe에 대한 ANSI/TIA-1152 사양에 따라 검증됩니다.

 

 

 

 

 

---

 

DSX5000 스펙

 

 

 

Fluke Networks DSX-5000 Specifications

Cable Types
Shielded and Unshielded Pair LAN Cabling	TIA Category 3, 4, 5, 5e, 6, 6A: 100 Ω ISO/IEC Class C, D, E, EA, F, and FA: 100 Ω and 120 Ω
Standard Link Interface Adapters
Permanent Link Adapters	Plug type: shielded RJ45 Optional Plug type: Tera
Channel Adapters	Jack type: shielded RJ45 Optional Jack type: Tera
Test Standards
TIA	Category 3, 4, 5, 5e, 6, 6A per TIA 568-C.2
ISO/IEC	Class C and D, E, Ea, F, FA certification per ISO/IEC 11801:2002 and amendments
Maximum Frequency	1200 MHz
General Specifications
Speed of Autotest	Full 2-way Autotest of Category 5e or 6/Class D or E: 9 seconds Full 2-way Autotest of Category 6A/Class EA: 10 seconds
Support Test Parameters (The selected test standard determines the test parameters and the frequency range of the tests)	Wire Map, Length, Propagation Delay, Delay Skew, DC Loop Resistance, Insertion Loss (Attenuation), Return Loss (RL), NEXT, Attenuation-to-crosstalk Ratio (ACR-N), ACR-F (ELFEXT), Power Sum ACR-F (ELFEXT), Power Sum NEXT, Power Sum ACR-N, Power Sum Alien Near End Xtalk (PS ANEXT), Power Sum Alien Attenuation Xtalk Ratio Far End (PS AACR-F)
Input Protection	Protected against continuous telco voltages and 100 mA over-current. Occasional ISDN over-voltages will not cause damage
Display	5.7 in LCD display with a projected capacitance touchscreen
Case	High impact plastic with show absorbing overmold
Dimensions	Main Versiv unit with DSX-5000 module and battery installed: 2.625 in x 5.25 in x 11.0 in (6.67 cm x 13.33 cm x 27.94 cm)
Weight	Main Versiv unit with DSX-5000 module and battery installed: 3 lbs, 5oz (1.28 kg)
Main unit and remote	Lithium ion battery pack, 7.2 V
Typical battery life	8 hours
Charge time*	Tester off: 4 hours to charge from 10 % capacity to 90 % capacity.
Languages supported	English, French, German, Spanish, Portuguese, Italian, Japanese, and Simplified Chinese
Calibration	Service center calibration period is 1 year
Environment Specifications
Operating Temperature	32 to 113°F (0 to 45°C)
Storage Temperature	-4 to 122°F (-20 to 50°C)
Operating relative humidity	0% to 90%, 32 to 95°F (0 to 35°C) 0% to 70%, 95 to 113°F (35 to 45°C)
Vibration	Random, 2 g, 5 Hz-500 Hz
Shock	1 m drop test with and without module and adapter
Safety	CSA 22.2 No. 61010, IEC 61010-1 2nd Edition + Amendments 1, 2
Operating altitude	13,123 ft (4,000 m)
EMC	EN 61326-1
Performance Specifications
Category 6A/Class EA test modes (or lower link categories)	DSX-5000 CableAnalyzer modules exceed with Level IIIe requirements of TIA 1152 and Level IV of IEC 61935-1.
Class FA test modes	DSX-5000 CableAnalyzer modules exceed Level V requirements as in the draft 4th edition of IEC 61935-1.
Length of Twisted Pair Cabling Without Remote
Range	800 m (2600 ft)
Resolution	0.1 m or 1 ft
Accuracy	± (0.3 m + 2 %); 0 m to 150 m ± (0.3 m + 4 %); 150 m to 800 m
Length of Twisted Pair Cabling With Remote
Range	150 m (490 ft)
Resolution	0.1 m or 1 ft
Accuracy	± (0.3 m + 2 %)
Propagation Delay Without Remote
Range	4000 ns
Resolution	1 ns
Accuracy	± (2 ns + 2 %); 0 ns to 750 ns ± (2 ns + 4 %); 750 ns to 4000 ns
Propagation Delay With Remote
Range	750 ns
Resolution	1 ns
Accuracy	± (2 ns + 2 %)
Delay Skew
Range	0 ns to 100 ns
Resolution	1 ns
Accuracy	± 10 ns
DC Loop Resistance Test
Range	0 Ω to 540 Ω
Resolution	0.1 Ω
Accuracy	± (1 Ω + 1 %)
Overload recovery time	Less than 10 minutes to rated accuracy following an overvoltage. Referencing is required after repeated or prolonged overvoltage.

 

 

 

---

 

DSX-5000 실사진

 

 

 

 

 

 

---

 

마무리

 

 

이외에도 저희 피엔텍에서는 다양한 사양의 계측장비를 보유하고있습니다.
제품구매 / 렌탈 / 대여  / 수리 등 기타 궁금한점이나 문의사항 있으시면 언제든지 연락주세요. 계측기 전문 상담사가 친절하게 안내해드리겠습니다.

​문의 : 010-2331-0295  /  ☎  02-407-5295
이메일 : dhjang02@gmail.com

 

계측기렌탈 / 계측기수리 / 계측기판매 / 중고계측기 / 오실로스코프 수리 / 오실로스코프 대여  / 계측기수리판매